3.54Rotate Graphical Image
Show/Rotate command enables you to rotate the displayed image so that you may look at the model from a different viewpoint. This command works closely with the axis orientation box located at the top of the Tool bar. This command is used for display purposes only and does not affect the model geometry.
•From the Show menu, select Rotate. Note that this command stays in effect until you clear it.
•Click and hold the left-mouse button. Drag the mouse in any direction while holding the left button. Notice the rotation of the axis orientation box in the Tool bar. Its position represents the position of the model as soon as you release the left-mouse button.
•Use the UP, DOWN, LEFT, or RIGHT ARROW keys to rotate the model. Press the + (plus) key to increase the rotation increment or the - (minus) key to decrease it. These keyboard assignments are always active, regardless of the Rotate command status.
•To reset the rotation to its default orientation, select the Show/Reset command.