3.56View Stereoscopic Mode

Show/Stereo command switches the display to 3-D Stereoscopic mode. The special blue-red filtering glasses provided with the program package are needed for this feature. The Stereo command works on a color monitor only.

In complex models, the orientation of the image on the screen may be difficult to visualize. Using the filtering glasses, you will be able to distinguish between the lines in the foreground and those in the background.

•From the Show menu, select Stereo.

•Rotate the model slightly from its default orientation and focus on one point within the model for a duration of 10 to 20 seconds.

•As you rotate the model, you will be able to detect the 3-D effect.

•To cancel the 3-D Stereoscopic mode and return to normal viewing mode, select the Stereo command from the Show menu.