5.20Create and Edit Planes

Creating the geometry of the structure is done using the Plane editor which displays your work in a planar (2-D) view. Plane editor is accessed via the Edit/Plane command.

•From the Edit menu, choose Plane. The dialog box of Figure 5-15 appears.

 

Figure 5-15 Plane dialog box

•Select the plane (or elevation) to work in, XY, XZ, or YZ.

•Choose the OK button.

Plane window is opened and the CHANGE PLANE dialog box is displayed. For more information on spCad Plane window and the Change Plane command refer to Chapter 5, spCad Plane Window.